|
|
|
Competition
Header Pricing
Mild
Steel Competition Header Prices
Stainless
Steel Competition Header Prices
Competition
Tri-Y Header Prices
Competition
Sportsman Headers
PLEASE
NOTE:
Prices shown are for fixture headers only. These competition headers
will fit most modern Pro style chassis, and Dragsters. These styles
of cars are purpose built with the intention of giving the professional
header fabricator plenty of room for a competition header. Please call
or write with the specifications and brand of your chassis.
|
Mild
Steel Competition Headers
Performance Welding mild steel competition headers are built using
the finest 18 gauge mild steel bent on mainly 6" radius tubing,
requiring only a few U-bends per set of headers bent on a 4"
or 5" radius. This wide radius creates a very smooth flowing
header for maximum power throughout the entire RPM range. Our
flanges are 5/16" or 3/8" thick, laser cut or CNC depending
on your application.
Included are machine-cut
hand-fit and finished merge collectors with the throat, and the
outlet transitions sized for your application.
We can build primary
tubes as short as 21" for your extreme RPM assault even using
this wide radius tubing.
Included with Performance
Welding mild steel competition headers are RacePac style EGT weldments
and spring mounted collectors.
Prices
shown are for fixture headers only. These competition headers
will fit most modern Pro style chassis, and Dragsters. These styles
of cars are purpose built with the intention of giving the professional
header fabricator plenty of room for a competition header. Please
call or write with the specifications
and brand of your chassis.
|
Mild
Steel Competition Headers / Small Block:
|
|
|
With
Econo Merged Collectors
|
|
1
3/4" - 1 7/8"
|
$1400.00
|
$1100.00
|
|
1
7/8"- 2"
|
$1425.00
|
$1125.00
|
|
2"-
2 1/8"
|
$1450.00
|
$1150.00
|
Mild
Steel Competition Headers / Big Block:
|
2
1/8" - 2 ¼"
|
$1500.00
|
|
2
1/4"- 2 3/8"
|
$1600.00
|
|
2
3/8"- 2 ½"
|
$1700.00
|
Mild
Steel Competition Headers / V6:
|
1
3/4"- 1 7/8"
|
$1300.00
|
|
1
7/8"- 2"
|
$1325.00
|
|
2"-
2 1/8"
|
$1350.00
|
Go
Back
|
| |
|
Stainless
Steel Competition Headers
Performance Welding stainless steel competition headers
are built using the finest 18 gauge 304L SS bent on mainly 6"
radius tubing, requiring only a few U-bends per set of headers
bent on a 4" or 5" radius. This wide radius creates
a very smooth flowing header for maximum power throughout the
entire RPM range. Our flanges are 5/16" or 3/8" thick,
laser cut or CNC depending on your application.
Included are machine-cut,
hand-fit and finished merge collectors with the throat and the
outlet transitions sized for your application.
We can build primary
tubes as short as 21" for your extreme RPM assault even using
this wide radius tubing.
Included with Performance
Welding stainless steel competition headers are RacePac style
EGT weldments and spring mounted collectors.
Prices shown
are for fixture headers only. These competition headers will fit
most modern Pro style chassis, and Dragsters. These styles of
cars are purpose built with the intention of giving the professional
header fabricator plenty of room for a competition header. Please
call or write with the specifications
and brand of your chassis.
|
|
304
Stainless Steel Competition Headers / Small Block:
|
1
3/4" - 1 7/8"
|
$2300.00
|
|
1
7/8"- 2"
|
$2400.00
|
|
2"-
2 1/8"
|
$2500.00
|
304
Stainless Steel Competition Headers / Big Block:
|
2
1/8" - 2 ¼"
|
$2600.00
|
|
2
1/4"- 2 3/8"
|
$2800.00
|
|
2
3/8"- 2 ½"
|
$2900.00
|
304
Stainless Steel Competition Headers / V6:
|
1
3/4"- 1 7/8"
|
$2100.00
|
|
1
7/8"- 2"
|
$2200.00
|
|
2"-
2 1/8"
|
$2300.00
|
Go
Back
|
| |
|
Competition
Tri-Y Headers
Performance Welding Tri-Y competition headers are built using
the finest 18 gauge material utilizing all 4" through 6"
radius U bends. This wide radius creates a very smooth flowing
header for maximum power throughout the entire RPM range. Our
flanges are 5/16" or 3/8" thick, laser cut or CNC depending
on your application.
Included are machine-cut,
hand-finished Two-into-One merge collectors. The first primary
tube length on our Tri-Y competition headers are built as short
as possible for your particular application, with the secondary
tube length and size of the Tri-Y used to tune to the power band
of your competition engine along with the final merge throat size
on the last two into one merged collector.
Most competition
Tri-Y headers use a megaphone on the outlet to increase the power
band of the header. We have had good success with the competition
Tri-Y header and feel that there are benefits in this type of
header if you are looking to extract that last ounce of power
and acceleration from you racecar.
Included with Performance
Welding Competition Tri-Y headers are Racepac style EGT weldments
and spring mounted collectors.
Prices shown
are for fixture headers only. These competition headers will fit
most modern Pro style chassis, and Dragsters. These styles of
cars are purpose built with the intention of giving the professional
header fabricator plenty of room for a competition header. Please
call or write with the specifications
and brand of your chassis.
|
|
Tri-Y
Headers / Small Block:
|
|
Mild
Steel
|
Stainless
Steel
|
|
1
3/4" primary
|
$1700.00
|
$2700.00
|
|
1
7/8" primary
|
$1725.00
|
$2800.00
|
|
2"
primary
|
$1750.00
|
$2900.00
|
Tri-Y
Headers / Big Block:
|
|
Mild
Steel
|
Stainless
Steel
|
|
2
" primary
|
$1750.00
|
$2900.00
|
|
2
1/8" primary
|
$1800.00
|
$3000.00
|
|
2
¼" primary
|
$1900.00
|
$3200.00
|
Go
Back
|
| |
|
Competition
Sportsman Headers
Performance Welding competition sportsman headers are built using
the finest 18 gauge mild steel bent on mainly 6" radius tubing,
requiring only a few U bends per set of headers bent on a 4"
or 5" radius. This wide radius creates a very smooth flowing
header for maximum power throughout the entire RPM range. Our
flanges are 5/16" or 3/8" thick, laser cut or CNC depending
on your application. Included are our spring mounted collectors
for ease of removal.
We tailor the primary
tube length more towards the RPM powerband a Sportsman racer runs
his racecar in, and we utilize a slip-on formed collector with
a merged transition spear to bring the cost of these headers down
to an affordable price.
Performance Welding
sportsman headers are built using the same wide radius tubing
as with our other competition headers and built with the same
quality and craftsmanship as all our headers giving you a two
year craftsmanship warranty.
Prices shown
are for fixture headers only. These competition headers will fit
most modern Pro style chassis, and Dragsters. These styles of
cars are purpose built with the intention of giving the professional
header fabricator plenty of room for a competition header. Please
call or write with the specifications
and brand of your chassis.
|
|
Competition
Sportsman Headers / Small Block:
|
|
|
|
1
3/4" - 1 7/8"
|
$1025.00
|
|
1
7/8" - 2"
|
$1050.00
|
|
2"
- 2 1/8"
|
$1075.00
|
Competition
Sportsman Headers / Big Block:
|
|
|
|
2
1/8 "- 2 ¼"
|
$1100.00
|
|
2
¼" - 2 3/8"
|
$1200.00
|
|
2 3/8" - 2 ½"
|
$1300.00
|
Go
Back
|
|
